15x11mm Sugar Cube Speaker For DCC Sound Decoder 8 Ohm 1 Watt Max

Description

This speaker has solder pads to make it easier for your installs. Keep in mind these are 8ohm, 1W max speakers. If you are installing these on model trains, please look at your decoders amplifier output specs. These can be wired in series (16ohm, 2W max) or in parallel (4ohm, 2W max).
These speakers are higher quality than most selling on ebay as they are
IP67 compliant
.
IP67 means
the speaker can be dropped into a body of water up to a 1.0m deep for half an hour. Also resistant to dust.
Please see images for more details and specs.
Product   Attributes
TYPE
DESCRIPTION
Mfr
CUI Devices
Series
CMS
Package
Tray
Part Status
Active
Technology
Magnetic
Type
General Purpose
Frequency - Self Resonant
550Hz
Efficiency - dBA
91
Efficiency - Testing
700mW/100mm
Efficiency - Type
Sound Pressure Level (SPL)
Port Location
Top
Shape
Rectangular
Material - Cone
Polyester, Polyethylene   Terephthalate (PET)
Material - Magnet
Nd-Fe-B
Ingress Protection
IP67 - Dust Tight,   Waterproof
Termination
Solder Pads
Size / Dimension
0.591" L x 0.433"   W (15.00mm x 11.00mm)
Height - Seated (Max)
0.138" (3.50mm)
Impedance
8 Ohms
Power - Rated
700mW
Power - Max
1W
Frequency Range
100Hz ~ 20kHz